[MRCA] Crystals ID

[David Olean]

the Bendix RA-10 was capable of being crystal controlled and used three 
pronged crystal sockets.  These look like they might fit the RA-10.  I 
have a RA-10 receiver that had provision for two xtl controlled 
frequencies between 2 and 10 MHz.  I think the crystal was 1630 kc below 
the desired operating frequency.

Dave K1WHS

On 1/18/2020 8:53 PM, Thomas Chirhart wrote:
> I found these two in my crystal box while looking for a 4075 for another member.
> Bendix Aviation SC7549A
> 5133/5588 and 5202/5662
> 455 IF
> Same size and configuration as crystals for the TCS rigs.
> Any ideas what radio they go to? Did Bendix make crystals for the TCS? A 5 Melgar could have been a TG/TF common channel or Harbor Control...or?
> 73 Tom K4NCG
>
>
>
>
> Sent from my iPhone
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20200121/8d329a45/attachment.html>