[MRCA] need help with connector compatibility

[John Caldwell]

Eugene,

MS3116J-14-19P is a MIL-DTL-26483 series 1 Straight Plug, #14 bayonet shell,
19 solder contacts, #20 AWG

Service class "J" is a compressing clamp and neoprene gland for moisture
proofing multi-conductor jacketed cables and strain relief. Telescoping
sleeves (MS 3420A)

can be used to adapt to cables smaller than minimum close-down.

 

MS3476L-14-19P is MIL-DTL-26483 series 2 Straight Plug, #14 bayonet shell,
19 crimp contacts, #20 AWG

No idea what service class "L" is, it's not in my catalog

 

I would consider the Amphenol JT06 commercial series (same as MIL-DTL-26483
series 1 but non w/ hexavalent plating, save some bucks, save some
turtles...)  If you have to buy new they're cheaper to buy.   Like this one.
<https://www.ebay.com/itm/AMPHENOL-PT06A14-19P-470-19-Pin-Connector-NEW/3239
29679042?hash=item4b6bb6a4c2:g:QDgAAOSw~jJbSgg5>
https://www.ebay.com/itm/AMPHENOL-PT06A14-19P-470-19-Pin-Connector-NEW/32392
9679042?hash=item4b6bb6a4c2:g:QDgAAOSw~jJbSgg5

 

My 2 cents worth,

John W8SDA

 

 

 

From: mrca-bounces at mailman.qth.net [mailto:mrca-bounces at mailman.qth.net] On
Behalf Of W2HX
Sent: Wednesday, January 15, 2020 3:26 PM
To: mrca at mailman.qth.net; MMRCG at groups.io
Subject: [MRCA] need help with connector compatibility

 

Hi friends.

 

I am having a devil of a time decoding the complexities of the amphenol
circular connector world.  I have a device that has a connector with the
following designation: 

MS 3116 J 14-19P (spaces added for readability).

 

I have located a potentially mating connector that has the correct 14-19S
connector arrangement but I can't figure out if the shells are compatible.
The connector I am considering is designated as:

MS 3476 L 14-19S.

 

I am having a dickens of a time determining of 3476L is compatible with
3116J  

And before I am recommended to contact Bill P., this is actually a full
cable I am looking at not just a connector (and yes, I am sure Bill could
answer the question but he can be hard to get ahold of).

 

Any assistance appreciated!
Thanks

73 Eugene W2HX

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20200115/432f3fe3/attachment.html>