[MRCA] UHF Connector ID

[Robert Downs]

Or the MP-68 or MP-73, if and only if the stud is 5/16” dia.  If it is 3/8” dia. it’s probably for the MP-65-C and/or the MWO kit for the MP-65-B to convert it to a –C.

 

The right angle adaptor is the standard UHF M-359 but with the Navy Type Number.  Used on too many aircraft and some smaller shipboard sets from about 1943 on to try to list.

 

Robert Downs

 

From: mrca-bounces at mailman.qth.net [mailto:mrca-bounces at mailman.qth.net] On Behalf Of KA1LHZ
Sent: Thursday, April 2, 2020 12:39
To: mrca at mailman.qth.net
Subject: Re: [MRCA] UHF Connector ID

 

The one on the right is from an AB-15 antenna base

DE KA1LHZ

 

On 4/2/20 1:14 PM, MICHAEL ST ANGELO wrote:

Been going through my connector collections and cataloging what I have. 

 

I came upon these two adapters. Can anyone tell me which equipment they were used with? 

 

The one on the left is easy, a Western Electric CW-49492 elbow. 


The one on the right as a stud apparently meant for a bulkhead or antenna mount. The stud is connected to the center pin. 

 

Mike N2MS 





______________________________________________________________
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MRCA at mailman.qth.net
 
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20200402/1143fa62/attachment-0001.html>