[MRCA] LS-166/U settings?

[Tim]

As Ray pointed out the switch just selects which pin on the connector (A or
L) is connected to the transformer/speaker.  Different sets source audio to
different pins..
http://www.radionerds.com/index.php/File:LS-166_schematic.JPG

Tim
N6CC

On Fri, Oct 25, 2019 at 12:45 PM MilComm Guy <m38inmaine at gmail.com> wrote:

> I think it switches between 600ohm and 8ohm.
>
> On Fri, Oct 25, 2019 at 3:22 PM KA1LHZ <sboard.ka1lhz at gmail.com> wrote:
>
>> Volume level.
>>
>>
>> On 10/25/19 2:45 PM, W2HX wrote:
>>
>> Hi there. What is the difference in functionality on the LS-166 for the
>> two settings, "field or pack use" and "vehicular use". What is the
>> difference?
>>
>>
>> thanks
>>
>> Eugene
>>
>>
>>
>>
>>
>> ______________________________________________________________
>> MRCA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/mrca
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:MRCA at mailman.qth.net <MRCA at mailman.qth.net>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> MRCA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/mrca
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:MRCA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20191025/7e4fcbb0/attachment.html>