[MRCA] Teletype paper

[B. Smith]

ARRL uses 170 cycle shift at 45 baud (60 WPM). I assume that since you 
are using your MD-522 in a "850" cycle mode you are required to straddle 
tune the signal. My guess is if you are exactly centered on the signal 
with equal space and mark then since the display depends on the mark and 
space filters then  the mark and space frequency is out of the pass band 
and you will not get a decent  "X" display. Solution is modify the modem 
or use the audio output for a add on display. Perhaps Another solution 
is just copy mark or space only. You will probably have to modify the 
modem anyway for transmitting 170 cycle shift? I would join the Green 
Keys list and post some questions there.
Z
You can do a search for 8.5 inch "roll" paper.


On 3/14/2019 9:02 AM, Ray Fantini wrote:
>
> Inching closer and closer to having the UGC-74 and MD-522 up and 
> running. Have paired them with a Harris RF-350K in the shack right now 
> and after I get this all working will be looking at building up cables 
> for use with the mutt and the GRC-106.
>
> The two new problems is that I have been having a hell of a time 
> trying to copy the ARRL bulletins in that I can pick them up but just 
> can’t seem to get the correct tuning display when doing that. This is 
> with using the 850Hz mode. The other issue is I just ran out of paper 
> last night and need a roll of teletype paper and wanted to know if 
> anyone had a roll or two they can spare.
>
> Ray F/KA3EKH
>
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html