[MRCA] AN/VSC-2 teletype

[MilComm Guy]

I also have the cables, I ran my set stand alone before I purchased a
shelter, then sadly sold it.  I was hoping to find the telelype and modem
again.  It worked quite well, I still have the printout from my first
contact, it was with another GRC-142 shelter in FL.
[image: DSCN5024.JPG]

On Mon, Feb 18, 2019 at 1:16 PM MilComm Guy <m38inmaine at gmail.com> wrote:

> I have a NOS ribbon, I listed it previously for trade, I am looking for a
> nice H-140 headset.
>
> On Sun, Feb 17, 2019 at 4:57 PM Mkdorney via MRCA <mrca at mailman.qth.net>
> wrote:
>
>> Better solution that a 1/4 trailer. Also costs a lot more, however. Don’t
>> know if the costs outweigh the benefits.
>>
>> Mark D.
>>
>> Sent from my iPhone
>>
>> On Feb 17, 2019, at 4:15 PM, Walt Skavinsky <walter.skavinsky at comcast.net>
>> wrote:
>>
>> You need a Dodge m37 and an S318 shelter make up your own grc122
>>
>> Walt
>>
>> here are only 1 0 types of people in this world... those who understand
>> binary, and those who don't.
>> *From:* RAFANTINI at salisbury.edu
>> *Sent:* February 17, 2019 13:35
>> *To:* MRCA at mailman.qth.net; MMRCG at groups.io
>> *Cc:* milsurplus at mailman.qth.net
>> *Subject:* [MRCA] AN/VSC-2 teletype
>>
>> In yet a new effort to move forward into the past I am attempting to get
>> all of the teletype equipment functional with my GRC-106, yes as crazy as
>> it sounds there was something called the AN/VSC-2 that was a GRC-106,
>> MD-522 and a teletype machine all installed in a M151, and thru a series of
>> unusual circumstances I happen to have all the bits for putting one
>> together but don’t think I will be going quite that far being it involves
>> giving up almost all the back set and the passengers seat so I will stick
>> with the stock GRC-106 installation on the mutt and maybe set the MD-522
>> and the UGC-74 up just outside.
>>
>> So I pulled the UGC-74B out last night and cleaned it up and did all the
>> regular checks and the like and that’s working. Will be pulling the MD-522A
>> today and cleaning that up and looking for all the cables and the one cable
>> I appear to need now is the data cable for the back of the UGC-74 that’s a
>> type MS3112E 16-23 P connector. I can build the rest. I am also somewhat
>> befuddled by what to do about the printer ribbon.  Anyone have any
>> experience with dumping ink on these things?
>>
>> A while back I tried to join the “Greenkeys” list but for some reason
>> they did not accept me? Perhaps there requirements for association is
>> beyond what the list are here. May have to try applying to that again but
>> figure it won’t hurt to ask around these reflectors first.
>>
>>
>>
>> Ray F/KA3EKH
>>
>>
>> ______________________________________________________________
>> MRCA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/mrca
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:MRCA at mailman.qth.net <MRCA at mailman.qth.net>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> MRCA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/mrca
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:MRCA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20190218/cb837582/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSCN5024.JPG
Type: image/jpeg
Size: 240724 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20190218/cb837582/attachment-0001.jpe>