[MRCA] loop picture

[MICHAEL ST ANGELO]

I have lots of surplus yellow and blue wire. I think I can substitute these colors since the current actually flows through the holes:-)

What receiver did you use?

Mike N2MS

> On December 12, 2019 at 8:52 PM "B. Smith" <smithab11 at comcast.net> wrote:
> 
>     A photo of a loop I used a couple of years ago to receive SAQ.
>     Note the Red and Black wire, the color change is necessary in order to have proper current flow from Positive to Negative. The holes were cut in order to reduce weight.
> 
>     Z
>     ______________________________________________________________
>     MRCA mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/mrca
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:MRCA at mailman.qth.net
> 
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20191213/cd7a9c0e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fhjagpjclpdikfea.jpg
Type: image/jpeg
Size: 395930 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20191213/cd7a9c0e/attachment-0001.jpg>