[MRCA] GRC-106 Remote at Gilbert?
KA1LHZ
sboard.ka1lhz at gmail.com
Fri Sep 2 17:09:00 EDT 2016
I have a pack of 9 volt batteries, the clips and need a roll of 2 sided
tape. The original spec for the BA-414 is 30 N cells. I was going to use
2 sets of 9 volt batteries in a series/ parallel configuration. The
only issue is that the radio needs to be running and tuned up prior to
using the remote control. The Vrc series with the MT-297 could be turned
on and off remotely with the AN/GRA-6, but not the GRC-106.
Cheers
DE KA1LHZ
On 09/02/2016 02:21 PM, Ray Fantini wrote:
> The AN/GRA-6 is the correct system for the AN/GRC-106. It uses the older style H-33 handsets just like the 106 and appears in the manual as the proper remote for that radio. Newer style remote systems like the AN/GRA-39 will not work with the 106 being it's the wrong style of connectors to mate with the radio.
> I just got a complete AN/GRA-6 kit and am in the process of trying to round up the two H-33 handsets and the weird BA-414 battery that you need to get them to work with the hope of using it with my self-propelled GRC-106 that I will have at Gilbert, the battery provides the high DC voltage that's used to work the relays in the C-434 local control unit at the radio although the battery lives in the C-433 remote. The whole mess is a lot like the old DC remote control systems that were employed in the Motorola and GE DC remotes of the fifties and sixties. The BA-414 is a 45 volt battery and I think I can cobble one together using five nine volt batteries.
>
> Ray F/KA3EKH
>
> -----Original Message-----
> From: MRCA [mailto:mrca-bounces at mailman.qth.net] On Behalf Of Tom B
> Sent: Friday, September 02, 2016 1:44 PM
> To: B. Smith <smithab11 at comcast.net>; mrca at mailman.qth.net
> Subject: Re: [MRCA] GRC-106 Remote at Gilbert?
>
> HI Breck,
>
> The GRA-6 is correct, but the manual for the GRS-39 says it should work, but I have not figured how to make it work, but there is a line in the
> GRC-106 manual for a dynamic mic input.
>
> Anybody got any clues on what/how the dynamic mic input is used for in the GRC-106?
>
> Tom
>
>
> On 9/2/2016 12:27 PM, B. Smith wrote:
>> Q. Which remote series was used with the GRC-106?
>>
>>
>> Z
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the MRCA
mailing list