[MRCA] KY-65 Mount and PRC-77

[Chance Wolf]

Now that I see more pics on your page, although it's set up for a KY-65 
now - it looks as though it's one of the types that's adjustable at the base 
end to allow mounting of a KY-38 instead by removing the two Phillips screws 
on each side, raising the bar until the second set of screw holes line up, 
then reinstalling the Phillips screws.   These are around too, and every one 
I've ever seen has been set up for the KY-65 rather than the 38.   There is 
a second non-adjustable version of this mount which is KY-65 only...usually 
the type fitted to GRC-206 FAC-racks.

One day I'll be able to dig up of those adjustable dual-mode ones for my own 
KY-38.  They're a bit rare.



-----Original Message----- 
From: B. Smith
Sent: Friday, October 21, 2016 7:27 AM
To: mrca at mailman.qth.net
Subject: [MRCA] KY-65 Mount and PRC-77

       I've posted some into on the KY-65 mount (PRC-77) and also some
vehicle wiring and power tips as well as precautions.  Thanks to all
that identified the mount as a KY-65.

Z

http://k4che.com/M151A1-Electrical/PRCpwr.htm

______________________________________________________________
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MRCA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html