[MRCA] GRC-9 DY-88 Help request

[Dennis DuVall]

Guys,

For future reference, Columbia Electronics has K-202, K-203 & K-204.  Has the plug-in filter caps too (and a lot of other stuff).

<http://stores.ebay.com/columbia-electronics-closeout-store/_i.html?rt=nc&_pgn=4&_ipg=48 <http://stores.ebay.com/columbia-electronics-closeout-store/_i.html?rt=nc&_pgn=4&_ipg=48>>

Dennis D.  W7QHO
Glendale, CA

******************

> On Nov 10, 2014, at 11:18 AM, Al Klase <ark at ar88.net> wrote-:
> 
> THAT'S GREAT!
> 
> I suspect that would be tough to find a replacement for that part.
> 
> For those reading along, it's a hermetically sealed relay with a tapped coil for 6, 12, and 24 volts, the three supply voltages supported by the DY-88.
> 
> Al
> 
> Al Klase – N3FRQ
> Jersey City, NJ
> http://www.skywaves.ar88.net/ <http://www.skywaves.ar88.net/>
> 
> On 11/10/2014 1:23 PM, Steve Gajkowski wrote:
>> Thanks Al, that is very close, much closer than the manual.  They state in the manual that the values aren’t to be trusted…  
>>  
>> Steve
>>  
>> From: MRCA [mailto:mrca-bounces at mailman.qth.net <mailto:mrca-bounces at mailman.qth.net>] On Behalf Of Al Klase
>> Sent: Monday, November 10, 2014 1:07 PM
>> To: mrca at mailman.qth.net <mailto:mrca at mailman.qth.net>
>> Subject: Re: [MRCA] GRC-9 DY-88 Help request
>>  
>> Steve,
>> 
>> 388.9 - 108.4 - 16.7
>> 
>> I do hope this is good news.
>> 
>> Al 
>> 
>> Al Klase – N3FRQ
>> Jersey City, NJ
>> http://www.skywaves.ar88.net/ <http://www.skywaves.ar88.net/>
>>  
>> On 11/10/2014 12:43 PM, Steve Gajkowski wrote:
>>>  
>>> Anyone have their DY88 open and can pull Relay K202.   I would like to validate the coil resistance between Pin 1-9, 1-8 and 1-7.
>>> The values in the manual are not close to what I see and in taking the coil apart, applied a little too much heat and had the 9 pin socket completely disconnect,  Anyway, want to make sure I have the coil properly wired as well as seeing if the coil impedance is even close to what is required.
>>>  
>>> Thanks for reading and great if you are able to provide an answer.
>>>  
>>>  
>>> Steve, kd3ht
>>> 
>>  
> 
> __
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20141110/7b956faa/attachment-0001.html>