[MRCA] Ft Miles BC-1306Power Supply

[B. Smith]

Questions about the BC-1306 power?   I did not have a secret PE-237 
hidden under the table.  I utilized  a home brew power supply with an 
older  GE Exec  mobile HV supply as a  inverter for the B plus. Low 
voltages for filaments were obtained using the usual adjustable LM 317. 
I've used these inverters to power GRC-9, GRC-109, RS-1, RS-6 etc.  This 
particular supply is still being tested and the large resistor with the 
red tape is on "test status". The red tape is to remind me of the high 
voltage.  :-)  An AUX socket on the side  powers the RCA AVR receiver or 
any other device.   The supply weighs about 10 pounds , the BC-1306 is 
about 20 pounds.  Don't ask me about the French.

Z




\


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20140430/3a4b32d7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ibbefeec.jpg
Type: image/jpeg
Size: 63824 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20140430/3a4b32d7/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jhhiajei.jpg
Type: image/jpeg
Size: 72724 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20140430/3a4b32d7/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bejaecii.jpg
Type: image/jpeg
Size: 54106 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20140430/3a4b32d7/attachment-0005.jpg>