[MRCA] remote antenna conduit?

[Peter Gottlieb]

You could pull it the other way and do the soldering in your shack. For control 
signals the barrier block is fine. I like rigid PVC, it's not that expensive. 
Consider running heliax, less loss and more stable.


On 9/8/2013 9:29 PM, W2HX wrote:
>
> Hello all,
>
> As part of building a new shack, I am taking this opportunity to run some 
> conduit from the shack out to the backyard for a vertical antenna hidden 
> amongst the trees. In addition to coax, I’ll need to run a coupler control 
> cable. I will either run my Mackay tuner out there or my sunair 1KW tuner out 
> there. Both of these tuners have an existing cable with the circular MS-style 
> connectors on the ends.
>
> Here’s the question. When you guys run antenna cables out to your antennas, 
> what size conduit do you use? I ask because the antenna coupler connectors are 
> something like 2” in diameter! So I would imagine I would need a 3” diameter 
> conduit which isn’t cheap (I am thinking of using flexible PVC).
>
> OR: Do you guys run the cable first, then bring the soldering iron up to the 
> antenna site and solder on the connector there? A lot of work to do in an 
> uncontrolled environment but would allow a 2” conduit to be installed since 
> the connector doesn’t need to be fished through it (it would be soldered on 
> after the cable emerges).
>
> What do you guys do?
>
> One other possible idea. Take the existing cable with connectors on both ends, 
> and cut off say 3 feet from the antenna end. Then I have one long cable with 
> no connector that will end near the antenna. I could then use a weather proof 
> box with a barrier strip inside and connect each of the wires in the control 
> cable to this barrier strip. Then take the 3 foot piece of cable with the 
> other connector and again attached the wires from the cut side to this same 
> barrier strip.
>
> Thoughts?
>
> 73 Eugene W2HX
>
>
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html