[MRCA] BC-348 chassis removal

[WA5CAB at cs.com]

No.  Only the two long studs.  There was originally a felt seal around the 
rectangular connector hole in the rear.  That could be stuck to the back of 
the chassis.  Otherwise, it's probably stuck in the area where the front 
panel folds back over the cabinet.  Try slipping a sharpened putty knife into 
that area all the way around.  Have someone hold the two handles on the front 
panel while you pull on and wiggle the cabinet.

Robert D.

In a message dated 5/27/2013 6:27:04 PM Central Daylight Time, 
cueball912 at yahoo.com writes: 
> Trying to open a BC 348.
> Undid the two thumbscrews.
> Tapped the cover.
> Cannot budge it. 
> Are there more screws that need to come out? 
> 
> 
> 73
> KB1ZXM
> 
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20130527/0d3327b5/attachment.html>