[MRCA] ARC-1 control box

[D. Platt]

Message follows, in two parts:

I recently acquired a brand-new RT-18/ARC-1 with the accompanying 
shock-mount, the front panel, and tools.  The mount has the cannon plug 
adaptor attached to the rear of the rack, which greatly simplifies 
things.  I'm therefore looking for some things.

First, although I'm going to get "the book" eventually, it will be a 
while, owing to technical considerations.  Does anyone have a good and 
readable schematic for the control box?  The one on-line and in the 
schematics handbook is difficult to read,  Specifically the guard 
channel switch which selects regular channel, guard, or both. I can dope 
out everything else.  I need this in case I have to build up a c-box.

Second, does anyone have a control box they'd care to dispose of? That 
would obviate the above requirement.

I think I doped out the transmitter autotune alignment internal 
alignment/tuning spur-gear set-up... At least I think I 
did..................  Those that have an ARC-1 will know of what I speak.

Thanks very much, in  advance.

Jeep - K3HVG