[MRCA] T-195A

[Robert Newberry]

Well i went to install the HV supply and noticed someones pencil marks
contradict the schematic. Essentially telling me to put a ground where
24vdc is supposed to be.

I instead powered up the set to see what is at the terminals where the HV
supply is supposed to go.

Problem one:

Someone removed the safety interlock. I tried to find convenient spots to
check for a path on both sides of the switch. I went from pin one of the LV
relay to pin eight in J606-8. I'm assuming that if I got continuity that I
should be good to go?

Problem two
The HV and LV relays are not energizing and I do not have 24vdc at f603 or
f602.

That seems to me that my safety interlock is not engaged? The safety switch
is missing and I cant find any trace of it.

The blowers do spool up and the set lights up when power is applied.

Any thoughts from the group would be appreciated.

Apparare Scientior
Paratus Communicare
-N1XBM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20130608/c6f18750/attachment.html>