[MRCA] RS-6

[Tim]

Hi Robert - I am only aware of the Instruction...manual in the link I had
forwarded.  Do you have another manual that identifies that particular
cable?  I thought that was Al's question.  My manual does not identify it
in a drawing or with a part number in the accessory parts list... Yes, if
you have that cable, you just plug it in...
Tim

On Sat, Apr 7, 2012 at 7:08 PM, <WA5CAB at cs.com> wrote:

> There's no jury-rigging required.  The photos in both manuals show the
> cable from the GN-58 simply plugged into PL-3 of the RA-6.
>
> >
> > .  Unless some other
> > document surfaces, it looks like this is a "locally fabricated" cable.
> > Now
> > that's the kind of Rear Area support we all need!
> >
> > I have not jury-rigged my set to try the GN-58 so I don't know how it
> > would
> > perform.  Probably fine, like the GRC-109.
> > 73, Tim
> > N6CC
> >
> > On Sat, Apr 7, 2012 at 3:28 PM, Al Klase <ark at ar88.net> wrote:
> >
> > >**
> > >While we're at it.  What goes between the GN-58 and the RS-6?  Is
> > >there an
> > >equivalent to REGULATOR, VOLTAGE CN-690/GRC-109, a cable with a box
> > >on the
> > >end with appropriate connectors for the RS-1/GRC-109?
> > >
>
> Robert & Susan Downs - Houston
> wa5cab dot com (Web Store)
> MVPA 9480
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>