[MRCA] ARC-38 chopper issues

[J. Forster]

Those sound close to what Ray has/needs.

-John

=================

> Gentlemen,  I may be able to assist.  I have a few 400Hz choppers that
> are marked as follows:
>
> Hughes 992200-1, 400cps, AIRPAX 300
>
> There's a schematic on the top and it has one coil (pins 3 and 4), Pins
> 1 and 6 are the NO contacts and Pin 7 is the chopper "lever". Looks like
> Pins 2 and 5 are ground (case?)
>
> A few are perhaps 1/4" taller than others and the AIRPAX No. is C-747.
> Hughes p/n is the same and is marked 400 CPS.  Same diagram.  Finally,
> one say Collins p/n 354-1021-009
>
> Any help?
>
> Jeep/K3HVG
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>