[MRCA] T-368 T/R problem

[J. Forster]

Will your wiring take it? There are 'slow acting' breakers for motors that
you might want to consider.

Best,
-John

=================


> OK, Joe.
> I am replacing the 20A breaker with a 30A breaker tonight.
>
> 73
> Mike
>
>
> --- On Sun, 11/1/09, Joe Foley <redmenaced at yahoo.com> wrote:
>
>> From: Joe Foley <redmenaced at yahoo.com>
>> Subject: [MRCA] T-368 T/R problem
>> To: mrca at mailman.qth.net
>> Date: Sunday, November 1, 2009, 10:45 PM
>> The T-368 should have a 30 amp
>> breaker running it, a 20 amp breaker is a little too
>> small.  Most T-3's pull about, or close to, 21 amps.
>>
>> http://groups.yahoo.com/group/T-368_BC-610/
>>
>> Joe KG2CI
>>
>>
>>      
>> ______________________________________________________________
>> MRCA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/mrca
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:MRCA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>