[MRCA] Grounding SP-600 JX-17

[mr3hi8st8or5y at cox.net]

Ken,
Thanks for both recomendations. seems like I could find an official looking connector to attach to the back.
This JX-17 rig is the newest of my old receivers (most are WWII vintage). My 75S-1 is the oldest of my new rigs.
TNX,
Roger K0RMK
---- Transmaster <22hornet at gmail.com> wrote: 
> The ground connection is built into the screw locked power connection.  If
> like my JX-17 it has been fitted with a different cord you have to just
> attach the ground connection to a convenient screw inside the like I have
> mine.
> 
> Ken
> 
> On Sun, Jan 4, 2009 at 6:36 AM, <mr3hi8st8or5y at cox.net> wrote:
> 
> > Belated New Years to all,
> > There is no ground connector that I can find on the back of this red knob
> > Hammarlund. Grounding does improve reception. I had been using the Allen
> > wrench No. 6 clip to connect to ground. HOWEVER, I felt current under my
> > shoe when steping on the solid wire to the grounding rods. The photo of the
> > back in my manual shows nothing labled ground.
> > So, if you have one of these, is it grounded and if so how?
> > 73,
> > Roger
> > _______________________________________________
> > MRCA mailing list
> > MRCA at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/mrca
> >
> 
> 
> 
> -- 
> Kenneth A. Crips, W7ITC, NRA Life member. Home of the Chew Crew,  Red Headed
> Irish Terrier House Ninjas, Chic', Cowboy, and Ladybug  10th degree black
> belts in Mouch Fue, Bed Fue, and Con Artist Fue.