[MRCA] Re: Thinning the Herd.....again.....Part Duex!

[WA5CAB at cs.com]

Rich,

For this mod to any Command Set receiver, before listing it you should remove 
the four screws in the corner of the sub-panel.  If the thing unplugs, good.  
You can list the receiver as no mods but with modified FT-230.  Or as missing 
the front plug-in, and sell the modified plug-in separately.  If the wires 
from the pot and switch are soldered to the pins of the connector in the well, 
that's a different story.  That solder is difficult to remove successfully, 
although not impossible.

In a message dated 11/15/2007 8:50:10 PM Central Standard Time, 
richard.arland at verizon.net writes: 
> SCR-274N equipment:
> 
> | 1 - BC455-B 6-9.1 mc, no mods
> 
> OOPS!!! This BC-455-B in fact has been modded. Sorry about that. There is a 
> replacement panel in the front below the main tuning dial with a toggle 
> switch and a knob. Most likely a BFO mod....or maybe part of a sub-space 
> transporter. Who knows??
> 
> 73 Rich W3OSS
> 

Robert & Susan Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at comcast.net> (Backup email)