[MRCA] T-195 Information/Parts Needed

[WF2U]

Robert,

Try Fair Radio Sales for the dogbone, or Barans Surplus.

Also, if you have the dynamotors (LV and HV) in the T-195, you'd be better
off if you replaced them with the solid state inverter power supplies, which
were installed in the later production runs and were also installed during
depot refurbish.
They're completely interchangeable with the dynamotors, but lighter and
efficient - they also don't have the high surge starting current like the
dynamotor. I power up my T-195 which has the solid state inverters with a 35
A 28 V switching supply (and is completely RFI free) which is about
one-third of the size of the R-392.
Fair Radio and Baran used to have (maybe they still do) NOS LV and HV
inverters for the T-195.

73, Meir WF2U
Landrum, SC

> -----Original Message-----
> From: mrca-bounces at mailman.qth.net
> [mailto:mrca-bounces at mailman.qth.net]On Behalf Of
> robert.boyd at servicecanada.gc.ca
> Sent: Tuesday, July 04, 2006 11:20 AM
> To: mrca at mailman.qth.net
> Subject: [MRCA] T-195 Information/Parts Needed
>
>
> Hi Everyone:
>
> I'm looking for the CX-1599U "dogbone" connector required to join
> a R392 and T-195. I believe that it is possible that a list
> member had a quantity of these constructed.
>
> Also, is there a source available for dynamotor brushes to aid in
> refurbishing. The bearings look to be standard items.
>
> Thanks & 73s
>
> Robert, VE3BE
>