[MRCA] Need military connector, 4 pin

TChirhart sparks at codepoets.com
Fri Feb 24 06:25:27 EST 2006


Hi Rock, thanks for the help. The converter is a TMC CV-1722, identical
to the CV-591A for the R-390 series except that it has crystal ovens for
stability. I found the 4 pin male plug at a hamfest last Sunday down in
Richmond VA, and a 3 pin female 1X1 jack but not a 4 pin jack. The
original CV-591's had a 4 pin Cannon plug/jack on them. I can send a pic
of the plug for reference. Thanks 73 Tom

-----Original Message-----
From: mrca-bounces at mailman.qth.net [mailto:mrca-bounces at mailman.qth.net]
On Behalf Of n1udi at att.net
Sent: Friday, February 24, 2006 12:15 AM
To: Military Radio Collectors Association
Subject: Re: [MRCA] Need military connector, 4 pin

Tom 

I have a couple of boxes filled  with Mill - type connectors. I'll check
this weeked and see if I have that one your looking for?

Rock  

-------------- Original message from "TChirhart" <sparks at codepoets.com>:
-------------- 


> Hope someone can help me out as I've been searching for over a year
for 
> a set of connectors. I have a SSB converter similar to the CV-591 that

> is missing the power connector. I believe it was a 4 pin, 1 inch
square 
> that mounts on the unit and the matching power cord. Is there anyone
out 
> there in military radio land that has one? I have a plug but not a 
> socket. I do have a 3 pin version of the socket but no plug. Thanks 73

> Tom K4NCG 
> 
> 
> _______________________________________________ 
> MRCA mailing list 
> MRCA at mailman.qth.net 
> http://mailman.qth.net/mailman/listinfo/mrca 
_______________________________________________
MRCA mailing list
MRCA at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/mrca



More information about the MRCA mailing list