[Motorola] Help with Visar programming

[Glenn Little WB4UIV]

I was contacted by a friend of mine about a Visar programming issue.
The radio in question is UHF.
He started with a radio that had a scan group consisting of channel 
three only.
The radio had all channels programmed, but only channel three could be 
selected.
After reprogramming the radio into the ham bands, he can still only use 
channel three.
When you press the up or down arrow keys, the backlight comes on as it 
should, but, the channel does not change.
The radio functions on channel three for transmit and receive.
He has reprogrammed the radio with all channels in the scan group and 
with no channels in the scan group and in both cases can only use 
channel three.
On power up the radio defaults to channel three and the channel cannot 
be changed.
The radio appears to program normally.
My friend has programmed Visars before without issue.

Anyone with ideas?


-- 
-----------------------------------------------------------------------
Glenn Little                ARRL Technical Specialist   QCWA  LM 28417
Amateur Callsign:  WB4UIV            wb4uiv at arrl.net    AMSAT LM 2178
QTH:  Goose Creek, SC USA (EM92xx)  USSVI LM   NRA LM   SBE ARRL TAPR
"It is not the class of license that the Amateur holds but the class
of the Amateur that holds the license"
---------------------------------------------------------------------------