[Motorola] Micor System 90 question

[Don Stiver]

The standard control head had a 8 ch switch for VHF and a 12 ch switch for uhf. You had to have a different receiver bd in VHF radio. The UHF had pins for 12 ch elements. There was a universal switching board that you could use to have rpt and direct capability. But it was not necessary. I had several 12 ch micor mobils with system 90 multi pl and 4ch scan capability Don Stiver
520-762-5243
1175 N. Solar Dr. 
Vail, Az 85641
donstiverprocessservice.com
 


     On Wednesday, April 8, 2015 7:25 PM, Don Stiver <d.stiver at att.net> wrote:
   

 UHF MICORS were 12 ch capable  VHF micors were 8 ch capable. You need control head with rotary ch switch Don Stiver
520-762-5243
1175 N. Solar Dr. 
Vail, Az 85641
donstiverprocessservice.com
 


    On Wednesday, April 8, 2015 6:43 PM, Jack Antonio <scr287 at att.net> wrote:
  

 Was there a System 90 Alternate Control Module that
could be used with an 8 or 12 channel radio?

As I recall, the standard ACM only accommodated up to
a 4 channel radio.

Or did you have to use the standard control
head for more than 4 channels?

Thanks

Jack Antonio WA7DIA/4



______________________________________________________________
Motorola mailing list
Home: http://mailman.qth.net/mailman/listinfo/motorola
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Motorola at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


  
______________________________________________________________
Motorola mailing list
Home: http://mailman.qth.net/mailman/listinfo/motorola
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Motorola at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html