[Motorola] HT1250 VHF Antennas

[Eric Lemmon]

Dennis,

You definitely want to use the correct antenna, which is the red-coded
8504762J01.  It is available from Motorola Parts for about $12.  Although
there are a number of Motorola antennas that have the same threads as your
HT1250, and might appear to work, that is a very risky practice- you might
toast the PA in the radio due to a mismatch.  The receiver in the HT1250 is
very sensitive, and really doesn't care much about the tuning of the
antenna, but the transmitter cares a lot- and will reduce its power level to
protect the PA transistor.

If the proper antenna is used, but the output doesn't meet your needs- even
with the power set to 5 watts- you might consider buying a higher-gain
Larsen Tuf Duck antenna.  These are in the $30 range, but they are
significantly superior to the standard Motorola antennas.  They are also
longer, and this might be a consideration.

73, Eric Lemmon WB6FLY


-----Original Message-----
From: motorola-bounces at mailman.qth.net
[mailto:motorola-bounces at mailman.qth.net] On Behalf Of Dennis Wade
Sent: Wednesday, October 05, 2011 10:31 PM
To: Discussion of equipment manufactured by Motorola;
motorola-Radios at yahoogroups.com
Subject: [Motorola] HT1250 VHF Antennas

Good evening all,

          I'm the recently new owner of a refurbished HT1250 VHF.
Having used a 99 ch MT1000 for a number of years, I loved the
ruggedness of the MT, but really wanted a more modern display, and a
programming system that didn't require me to dumpster dive for a
suitable computer... :).

          I used the HT in an annual public service event during which
I am in places where hitting certain repeaters is sketchy...sometimes
I can, sometimes I can't.  I know about how the MT will perform...this
was my first chance to use the HT.  I noticed a subtle difference in
that the HT wasn't quite able to open machines that I probably could
have the year before with the MT.  However, circumstances prohibited
me from carrying both radios. (I did not notice a similar difference
on the receive side).

          One thing I discovered is that in this
document,(http://www.wiscomm.com/MotoCatalog/HT750-HT1250-HT1550.pdf)
on page 23, it describes various VHF antennas available for the
HT1250.  Only one covers the ham band, i.e. part number 8504762J01.

           I looked to see what I was given with refurbished radio..I
could not find a part number..only "Motorola VHF" embossed in the
rubber cover.

           There really is no clear answer because multiple things may
have changed over the course of the year.  I do have two questions:

                 1.  Could the wrong antenna contribute to the noticed
difference in performance?

                 2.  Where is (or is it important) to find the part
number on the antenna I have?

             and, (I know, this is 3),

                 3.  Are there 3rd party antennas that might perform better?

        Thanks for your help,

                    Dennis



-- 
"If they trust you, it is an extraordinary privilege, and you simply
can't abuse it."
      - A. Alan Post  1914-2011.  California Legislative Analyst 1949-1977.

-------------------------
Dennis L. Wade
KG6ZI
Carmichael, CA
______________________________________________________________
Motorola mailing list
Home: http://mailman.qth.net/mailman/listinfo/motorola
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Motorola at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html