[Motorola] Smart Rib RLN1015C

[israel1718 at aol.com]

I is for Internal Power, you can attach a battery pack that will hold I think 8 AA battery's in the bottom of the SRIB

O is Off

XP is eXternal Power, to be used with an external power supply

That's the only information I know....



------Original Message------
From: Glenn Little WB4UIV
Sender: motorola-bounces at mailman.qth.net
To: motorola at mailman.qth.net
ReplyTo: Discussion of equipment manufactured by Motorola
Subject: [Motorola] Smart Rib RLN1015C
Sent: Apr 15, 2010 00:10

I have a RLN1015C Smart Rib.
I hope to be able to use this for reading and programming some Sabers 
I bought at a recent hamfest.
I understand that the center pin for this Rib is negative.
What is the Voltage and Current of the required power supply?
The Rib has a three position switch 1, 0 and XP.
What is the XP position for?
There is a three pin header inside the RIB, what is this for?
Pin 14 is broken off on the DB-25 connector. Is this pin used?
Is there a manual available for this RIB?


Any help greatly appreciated.

Thanks
73
Glenn
WB4UIV

______________________________________________________________
Motorola mailing list
Home: http://mailman.qth.net/mailman/listinfo/motorola
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Motorola at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


Sent from my BlackBerry® smartphone with SprintSpeed