[Motorola] Maratrac clamshell head and cable

[israel1718 at aol.com]

Funny you mentioned
I'm going thru all my stuff and I have a couple maratracs, I need to see if I have an extra clam shell head and cable for you

On another note, I have been trying to real several of those radios and they all come up with a serial busy error (error #2) and I can't read the radios
I have the radios hooked up to the big control head that has the "88" display, the one without the squelch knob,, should I try hooking them up a different way? Or maybe is my programming cable bad?
Most of the ones I have are UHF/VHF and maybe 1 or 2 6 Meter's

Could the problem be they have been programmed to operate with the clam shell control head? Some radios will display on the control head that its on CH1, and some won't show anything but sound a beep when I press buttons on the head



------Original Message------
From: Jeff
Sender: motorola-bounces at mailman.qth.net
To: Discussion of equipment manufactured by Motorola
ReplyTo: Discussion of equipment manufactured by Motorola
Subject: [Motorola] Maratrac clamshell head and cable
Sent: Apr 6, 2010 13:04

Is there anywhere on the internet that I can find the schematic for the Maratrac 8 channel head and cable?  This would be the very basic head and cable setup.  Could a Miterk head and cable be modified to work?  I have put several on 6 meters and I'm short one cable.   I only need 4 channels in my area, and for testing it would be great.  Thanks, Jeff, N9OFB
______________________________________________________________
Motorola mailing list
Home: http://mailman.qth.net/mailman/listinfo/motorola
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Motorola at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


Sent from my BlackBerry® smartphone with SprintSpeed