[Motorola] error#56

[KBØNLY]

What I meant is...

P200
HT600
M110
M120

Etc...

Hard to say without knowing the Series, sorry I should have said series 
rather than model, as to what might be the culprit here..

Scott


----- Original Message ----- 
From: "Jeff" <jsharrow at wi.rr.com>
To: "Discussion of equipment manufactured by Motorola" 
<motorola at mailman.qth.net>
Sent: Wednesday, September 23, 2009 7:58 PM
Subject: Re: [Motorola] error#56


>2 out of 5 Motorola Radius 6 channel low band 42-50 Mhz. MODEL 
>#D51LRA9743BK
> RADIOS can't be read from or written to because "ERROR MESSAGE #56 HAS
> OCCURRED, RADIO CODE PLUG ERROR" comes up on the screen after the reading
> percentage gets to 100%. Can this be fixed?
> ----- Original Message ----- 
> From: "KB0NLY" <kb0nly at mchsi.com>
> To: "Discussion of equipment manufactured by Motorola"
> <motorola at mailman.qth.net>
> Sent: Wednesday, September 23, 2009 6:03 PM
> Subject: Re: [Motorola] error#56
>
>
>> What model radio are they?
>>
>> Scott
>>
>>
>> ----- Original Message ----- 
>> From: "Jeff" <jsharrow at wi.rr.com>
>> To: "Discussion of equipment manufactured by Motorola"
>> <motorola at mailman.qth.net>
>> Sent: Wednesday, September 23, 2009 5:50 PM
>> Subject: [Motorola] error#56
>>
>>
>>>I have several Radius low band 6 channel radios that I gave to a friend 
>>>of
>>>mine to program.  2 out of 5 radios of the radios could not be read.
>>>After
>>>the percentage bar, that comes up durring reading has hit 100%, the 
>>>screen
>>>comes up with an error message that says, "ERROR #56 HAS OCCURRED   RADIO
>>>CODE PLUG ERROR".   What is wrong?  Can't read from or write to either of
>>>the 2 radios that the message comes up on.  However the 2 radios that 
>>>have
>>>this problem both have the "good radio beep" and work just fine except 
>>>for
>>>reading from, or writing to.  All 5 radios are model number D51LRA9734BK.
>>>Could it be that newer software was used to program the 2 radios than 
>>>what
>>>was used to read them?  Are they just stuck on the freqs that are in them
>>>now?  Any info will help.  Thanks, Jeff
>>> ______________________________________________________________
>>> Motorola mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/motorola
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Motorola at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> Motorola mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/motorola
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Motorola at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Motorola at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.112/2390 - Release Date: 09/23/09 
05:52:00