[Motorola] error#56

[KB0NLY]

What model radio are they?

Scott


----- Original Message ----- 
From: "Jeff" <jsharrow at wi.rr.com>
To: "Discussion of equipment manufactured by Motorola" 
<motorola at mailman.qth.net>
Sent: Wednesday, September 23, 2009 5:50 PM
Subject: [Motorola] error#56


>I have several Radius low band 6 channel radios that I gave to a friend of 
>mine to program.  2 out of 5 radios of the radios could not be read.  After 
>the percentage bar, that comes up durring reading has hit 100%, the screen 
>comes up with an error message that says, "ERROR #56 HAS OCCURRED   RADIO 
>CODE PLUG ERROR".   What is wrong?  Can't read from or write to either of 
>the 2 radios that the message comes up on.  However the 2 radios that have 
>this problem both have the "good radio beep" and work just fine except for 
>reading from, or writing to.  All 5 radios are model number D51LRA9734BK. 
>Could it be that newer software was used to program the 2 radios than what 
>was used to read them?  Are they just stuck on the freqs that are in them 
>now?  Any info will help.  Thanks, Jeff
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Motorola at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html