[Motorola] Keypad programming for XTS-5000?
Paul Gilbert
niklas at pbgilbert.net
Thu Mar 12 20:35:24 EDT 2009
TVSJR is correct....
If the radio is a trunking radio, you can not get the FPP option (Q53).
Also, the Q53 option tops your freq list a 250 channels.
If you are Fed Gov you can order the Q52 option and they will load that
into any radio.
You can sometimes find a radio at Dayton and online that has the Q52
option (most likely hacked).
I have a VHF and UHF with Q53. It will do the freqs and tones and names.
You can add it via a flashupgrade if you have the right radio.
tvsjr wrote:
> Call Moto. The radio must be a model 3, and I don't think they'll put FPP
> into a trunking radio. You'll need a flashport upgrade kit to enable option
> Q53 FCC Front Panel Programming. You'll also need the hardware dongle to
> plug into the side of the radio to enable FPP functionality (FCC
> requirement, unless you are .gov and can also order Q52 Federal Government
> Front Panel Programming).
>
> -----Original Message-----
> From: motorola-bounces at mailman.qth.net
> [mailto:motorola-bounces at mailman.qth.net] On Behalf Of Coote, Jay
> Sent: Thursday, March 12, 2009 10:45 AM
> To: Discussion of equipment manufactured by Motorola
> Subject: [Motorola] Keypad programming for XTS-5000?
>
>
> Is anyone aware of ways to make an XTS-5000 (full keypad version)
> capable of keypad programming of squelch codes and frequencies? Have I
> overlooked this in the software?
>
> Thanks
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul Gilbert, KE5ZW H.E. Niklas Vasilevich
niklas at pbgilbert.net CB,CSM,KGA,OTR,ORH,Crane,AoA
512-733-3035 Cellular Kingdom of Ansteorra
Society for Creative Anachronism
Texas Dept. Of Transportation, Radio Operations
Austin, Texas 512-506-5141
pgilber at dot.state.tx.us
"The Eagle has landed"
"Sable, a double-headed eagle, a bordure engrailed or"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
More information about the Motorola
mailing list