[Motorola] HT1250 PROGRAMMING

K0DAN k0dan at comcast.net
Thu Nov 6 14:13:07 EST 2008


Yes, ther LS+ has a full keypad radio, as did the plain LS. I'm of the 
belief both are factory original, and not modified, but can't say with 100% 
certainty. Neither had any pry marks on the case or other obvious signs of 
being opened/switched.

I no longer have the other radio, a HT1250-LS (altho I still have a copy of 
its codeplug), and it, too, was a full keypad radio, which I also believe 
was factory original. Its nomeclature is H25RDH9DU5. As mentioned before, it 
programmed fine, and waking up DMF was no problem...once the CPS items were 
set up, it generated DTMF during PTT just like you'd expect.

73
Dan
k0dan


\----- Original Message ----- 
From: "Eric Lemmon" <wb6fly at verizon.net>
To: "'Discussion of equipment manufactured by Motorola'" 
<motorola at mailman.qth.net>
Sent: Thursday, November 06, 2008 11:13 AM
Subject: RE: [Motorola] HT1250 PROGRAMMING


> According to the Motorola catalog, the H25RDH9DP5 is an HT1250-LS+ radio 
> for
> 403-470 MHz, 16 channels, 1-4 watts, and with a limited keypad.  You can't
> generate DTMF tones unless you have a full keypad.  If the subject radio 
> has
> a full keypad, it was added after it left the factory, and may not be
> correctly interfaced with the logic board.  Does your other radio have a
> full keypad?
>
> 73, Eric Lemmon WB6FLY
>
>
> -----Original Message-----
> From: motorola-bounces at mailman.qth.net
> [mailto:motorola-bounces at mailman.qth.net] On Behalf Of K0DAN
> Sent: Thursday, November 06, 2008 8:56 AM
> To: Discussion of equipment manufactured by Motorola
> Subject: [Motorola] HT1250 PROGRAMMING
>
> I'm trying to wake up DTMF on an HT1250-LS+ and the radio is fighting me.
>
> The CPS works fine with this radio for everything but the DTMF.
>
> Am trying to set up the radio as a 16 channel (zone) conventional-only 
> radio
>
> on amateur freqs.
>
> Here's pertinent info I can provide:
>
> Radio model H25RDH9DP5
>
> Conventional personalities: For all modes, tried Phone Syetem disabled, 
> and
> Phone Syetem=1, can't generate DTMF in either case
>
> LS trunking: Nothing enabled
>
> Phone list: Nothing in list
>
> Phone system 1:
> Dial type: live
> Access/Deaccess codes: none
> PL required: no
> Override busy channel lockout: no
> Strip PL: no
> Access/Deacces type: imemdiate auto
> Deaccess Backporch delay: disabled
>
> Tone configuration:
> Tone span: timed
> PTT sidetone: yes
> PTT short sidetone: no
> Mute access/deaccess: yes
>
> Revert: no revert
>
> I did the same programming on an HT1250-LS (not +) with no problems. Tried
> to clone radios, clone wouldn't work cuz different models, so manually 
> tried
>
> to copy field-for-field yet the LS+ won't generate DTMF. Otherwise the 
> radio
>
> seems to be working fine.
>
> Will someone please give me some guidance?
>
> Thans & regards,
>
> dt
>
>
>
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:Motorola at mailman.qth.net
>
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:Motorola at mailman.qth.net
> 



More information about the Motorola mailing list