[Motorola] M1225 DPL/TPL problem

[Eric Lemmon]

Bill,

Most commercial mobile radios are designed so that they go into monitor mode
(carrier squelch) as soon as the mike is lifted from its hangup clip.  This
action complies with the FCC rules that one must monitor the frequency for
other traffic before transmitting.

Also, be certain that the "Power-Up Mode" is set to "Standard" in the RSS.
If it is set to "Monitor" the radio will be in carrier squelch.

73, Eric Lemmon WB6FLY
 

-----Original Message-----
From: motorola-bounces at mailman.qth.net
[mailto:motorola-bounces at mailman.qth.net] On Behalf Of Bill Morphy
Sent: Saturday, January 20, 2007 2:58 PM
To: Discussion of equipment manufactured by Motorola
Subject: [Motorola] M1225 DPL/TPL problem

I have several M1225s in VHF and UHF flavor. I'm able to program them for 
either DPL or TPL, but for some reason all receivers operate in CSQ.

Any ideas ?