[Motorola] Re: Need to program a pair of UHF MSF5000 rptrs

[D Eaton]

On Jan 21, 2006, at 7:21 AM, Dick wrote:

Hi, gang:

Anyone in southern CA have the stuff to program Moto MSF5000 rptrs?

I have two of them.  One is a digital CXB and one is an analog CLB.

I need to put the CXB on a ham frequency pair and the CLB on a GMRS
pair.  Both will be used for local Neighborhood Watch and Fire Watch, so
we're hoping to get someone to donate the programming.

I'm in Orange County and will bring them to L.A., San Diego, or Orange
County to get them set up.

Thanks in advance,

Dick
_______

Dick,

I can re-programm the codeplug for the Analog MSF5000 (CLB) for you.

The Digital (CXB) can be programmed with Radio Service Software still 
available from Motorola for $75.00.
You will also need a Radio Interfaced Box (RIB) and cables, batLabs.com 
has info to build if you so inclined.
If you are changing the frequency by significant amount the MSF will 
need to be re-tuned as well.

I've included an order form for the Analog MSF5000 Codeplug below.

Doug Eaton
Douglas Technologies
----

Fill in the information on the Order Form below and, ideally,
sending the original codeplug from the station.

The model number, ie: C74CLB7106AT, identifies the type of
synthesizer on the uniboard in the RF Tray.

If the station has been serviced or upgraded, the model number
on the cabinet may no longer reflect the type of synthesizer.

Sending the original codeplug will identify the synthesizer type.

The codeplug order form is include at the end. If you have any
other questions, feel free to email us.

=================================================================
MSF5000 STATION CONTROL CODEPLUG ORDER FORM  (U803)   Page 1
=================================================================

Douglas Technologies, Inc.
1305 E Coolidge Av.
Wheaton, IL  60187
PHN: 630.933.0036
EMAIL: sales at dougtech.com
WEB: http://www.dougtech.com

    Price: $125.00 each
            $15.00 extra for more than 4 channels
            $15.00 extra for non standard AUTO ID Interval
            $15.00 extra for non standard TOT or DOD Times
            $25.00 extra per channel on HB PURC5000
            $75.00 duplicates ordered at same time
    Terms: (International) Payment Prior to Shipment
           (US Business) Balance Due when you receive order
           (US Personal) Payment Prior to Shipment or COD
           $7.50 charge for Payment by Wire Transfer
           Sorry No Credit Cards
Shipping: (International) Shipping will be Quoted
           (US)  $5.00 UPS Ground Included
                $10.00 UPS 3 Day Select
                $20.00 UPS 2nd Day Air
                $30.00 UPS Next Day Air
                 $8.00 Extra UPS COD

=================================================================



MSF5000 STATION CONTROL CODEPLUG ORDER FORM  (U803)   Page 2
=================================================================
CUSTOMER INFORMATION:

Company:
    Name:
Address:
   Phone:
     Fax:
   Email:
    Ship: [ ] Ground [ ] 3Day Select [ ] 2Day Air [ ] Nxt Day Air
   Terms: [ ] Invoice  [ ] Prepay  [ ] Wire Transfer [ ] COD
=================================================================
STATION INFORMATION:

         STATION MODEL NUMBER: [                      ]
        SPECTRA-TAC OPERATION: [ ]YES [ ]NO
MULTI-CODED-SQUELCH EQUIPPED: [ ]YES [ ]NO
        IN-CAB REPEAT ENABLED: [ ]YES [ ]NO
              DUPLEX WIRELINE: [ ]YES [ ]NO
              AUTO ID INTERVAL [   ] 15 Minutes standard
-----------------------------------------------------------------
CHANNEL DATA:

       PARAMETER     CHN 1       CHN 2       CHN 3       CHN 4
---------------  ----------- ----------- ----------- ------------
         TX FREQ:
         RX FREQ:
         TX CODE:
         RX CODE:
         LIN TOT:
         LOC TOT:
         RPT TOT:
         RPT DOD:
    PTT PRIORITY:
         RPT ACT:
        RPT HOLD:
        RX AUDIO:
  LIN AUD/DA MIX:
  LOC AUD/DA MIX:
  RPT AUD/DA MIX:
         AUTO ID:
ALARMS OVER AIR:
ALARMS WIRELINE:
=================================================================



MSF5000 STATION CONTROL CODEPLUG ORDER FORM  (U803)   Page 3
=================================================================
CHANNEL PARAMETER DESCRIPTIONS AND DEFINITIONS
-----------------------------------------------------------------
Default Values shown in (parenthesis)
possible combinations shown where appropriate
    TX & RX FREQ: Transmit and Receive Frequencies
    TX & RX CODE: Transmit and Receive Code
                    CSQ
                    PL/DPL Code
                    Connect Tone
LIN/LOC/RPT TOT: PTT Time-Out-Timers (120/0/60)
                    15 to 465 sec in 15 sec steps
         RPT DOD: Repeat Drop-Out-Delay (2)
                    1 to 7 seconds in 1 sec steps
    PTT PRIORITY: PTT Priority Left to Right (WRL)
                    W=Wireline, R=Repeat, L=Local
                    WRL, WLR, RWL, RLW, LWR, LRW,
                    WR, WL, RW, RL, LW, LR, W, R, L
RECEIVER QUALIFIERS:
                    S = Signal  C = PL/DPL detect
                    A = Auxillary Detect
                    D = PL Disable bypasses PL qualifier
                    NOTE: SC often refered to as "AND SQUELCH"
         RPT ACT: Qualifiers for Repeater PTT to activate (SC)
                    SCA, SC, SA, CA, S, C, A, OFF, ON,
                    SCD, SAD, CAD, CD, AD
        RPT HOLD: Qualifiers for Repeater PTT to continue (C)
                    SCA, SC, SA, CA, S, C, A, OFF, ON,
                    SCD, SAD, CAD, CD, AD
        RX AUDIO: Qualifiers for Receiver Audio (C)
                    SCA, SC, SA, CA, S, C, A, OFF, ON
      AUD/DA MIX: Mix Audio with Data during Data Detect (No)
                    Yes/No
         AUTO ID: Station Callsign for Morse Code Automatic ID

ALARMS OVER AIR: Audible Alarms on Transmit Audio (Disabled)
                    Enabled/Disabled
ALARMS WIRELINE: Audible Alarms on Wireline Audio (Enabled)
                    Enabled/Disabled
=================================================================