[Motorola] Equipment Rack Sources??

Thu, 15 Jan 2004 09:21:07 EST

If this will help anyone!

I have a lot of 19 " racks of both varieties in our ware house for sale and 
over 100 5 & 6 ft. Base Station Cabinets (with 19" rack configuration inside.  
I also have a "LOT" of 35 & 43 Mhz Quintron/Glynayre base stations and parts 
(of the tube final versions, along with a lot of "Big Pass Cavities for these 
freq ranges). I also have a lot of 12 volt & 24 volt High amp rectifier power 
supplies, in 19" racks (used on paging terminals etc.)

Contact me at my email address or by phone if you need some.

Charles H. Beard
CSSI
206 Wiggs Lane
Weatherford, Texas 76086-5597
877-341-2337 Extension 400 Office
817-598-1661 or 877-613-0230 Fax
817-613-7072 or 800-994-3013 Cellular
817-596-1000 Pager
[email protected] email to pager
[email protected] home
[email protected] office

The Motorola racks are not standard 19" racks. 
Although they are the same width, Motorola drilled
holes evenly along the rails.  A "true" 19" rack has
the holes grouped together with varying spacing
between the holes.

You cannot always get "true" rack panels to "match up"
(that is not have gaps between them) when using a
Motorola type of rack.  Conversely, Motorola equipment
will not always "match up" when using a "true" rack.

Both 19" and 23" wide racks are used throughout the
computer industry especially in large equipment rooms.
You can often get a "good deal" on used racks from
used computer dealers.

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---