[Motorola] HLN 4020

Wed, 24 Sep 2003 23:26:34 -0500

Thanks, that should help....  Now, just need to add power, run audio =
into
it, and see what happens! (i.e. how to utilize the other signals) :)

73
Ken=20

-----Original Message-----
From: [email protected] =
[mailto:[email protected]]
On Behalf Of Doug Fitts W7FDF
Sent: Wednesday, September 24, 2003 10:50 PM
To: [email protected]

You're in luck here Bubba.....I just pulled out one of my Mitrek manuals =
and
found the info:

Plug/Jack P3  pin 1 external tone input, pin 2 squelch disable, pin 3 PL
tone output, pin 4 secondary PTT, pin 5 audio mute, pin 6 det audio =
audio,
pin 7 PL filter, pin 8 B+ and finally pin 9 B-

Hope this helps and good luck!

Doug  W7FDF
Pima Radio Network
www.pimaradionetwork.org

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Ken Cechura
Sent: Wednesday, September 24, 2003 4:20 PM
To: [email protected]
Subject: [Motorola] HLN 4020

I need the pinout for the header connector on the mitrek REEDED PL =
board...
I know this info is in the manual, but I don't have one.  I'm trying to
connect it to another type of radio...

Thanks
Ken
Post: mailto:[email protected]

______________________________________________________________
Motorola mailing list
Home: http://mailman.qth.net/mailman/listinfo/motorola
Help: http://mailman.qth.net/faq.htm
Post: mailto:[email protected]