[Motorola] Micor Help

[Eric Lemmon]

Jay,

Yes, a TPN1106 Option C28 or Option C38 Power Supply can be swapped with
the plain power supply.  Some C28 or C38 Power Supplies also have Option
C29, which is a tone generator that puts a beep tone on the air when the
AC power fails.  If this option is in your power supply, you'll need to
connect the tone lead to Pin #22 on the F1 or F1-PL module.  All other
connections remain the same.

You really should get the Motorola manual 6881104E92 for reference.

73, Eric Lemmon WB6FLY

"Coote, Jay" wrote:
> 
> I have a 100-watt VHF unitized chassis Micor repeater with a 120VAC-only
> power supply.
> I have some unused 120VAC power supplies WITH battery backup.
> Can one of these be dropped right in, or will I have to convert the main
> board and chassis?
> 
> Thanks,
> Jay
> _______________________________________________
> Motorola mailing list
> Motorola@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/motorola