[Motorola] Programming Cable to Maxtrac

[tvsjr]

It connects to the mic jack. The connector is an 8-pin RJ-45. I usually 
manufacture my cables using a straight-through RJ-45 Ethernet patch cable 
and a RJ45->DB25 adapter, custom wired.

Terry

At 11:21 PM 12/26/2003 -0500, THardy8664@aol.com wrote:
 >Hello
 >Where does the cable from the "RIB" connect @ the radio (Maxtrac / Radius)?
 >I'm buying a "RIB" and programming cable on Ebay, but can't make out what 
the
 >"radio" end of the cable uses for a connector. Hopefully it will connect to
 >mike jack? At least that what the schematic on Batlabs shows!
 >
 >Happy New Year
 >
 >Tim Hardy W7TRH
 >Vashon Is. Wa
 >
 >
 >--- StripMime Report -- processed MIME parts ---
 >multipart/alternative
 >  text/plain (text body -- kept)
 >  text/html
 >The reason this message is shown is because the post was in HTML
 >or had an attachment.  Attachments are not allowed.  To learn how
 >to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
 >______________________________________________________________
 >Motorola mailing list
 >Home: http://mailman.qth.net/mailman/listinfo/motorola
 >Help: http://mailman.qth.net/faq.htm
 >Post: mailto:Motorola@mailman.qth.net