[Motorola] Re: Quantar Repeater Noisy Squelch?

Thu, 07 Mar 2002 10:02:07 +0800

Make sure the "analog RX activation" "repeater" and "repeater hold in" are set for "SC" Carrier and PL.

From the main menu:

F4 then F4.

Good luck and let us know how you do.

Jim 

----Original Message-----
From: Urban Larsson <[email protected]>
Date: Wed, 06 Mar 2002 16:27:47 GMT 
To: [email protected]
Subject: [Motorola] Re: Quantar Repeater Noisy Squelch?

> I belive Quantars start up in CSQ mode after a reset or 
> powerdown. Micors are "stuck" in PL mode. It couldn't be 
> that simple?
> 
> Ubbe.
> 
> > We have a couple 25-100 watt UHF Quantar repeaters in 
> service.
> > 
> > 95% of our mobiles and portables are Motorola and have 
> reverse-burst PL on
> > transmit.
> > 
> 
> > Our dispatchers and officers are reporting occasional 
> squelch bursts from
> > the Quantar 
> > repeaters even when the signal from a Motorola radio 
> using the repeater is
> > full quieting.
> > 
> > Of course, Brand-X radios do not have reverse burst and 
> all of them produce
> > a 
> > squelch tail in the repeater.
> > 
> > Our remaining Micor repeater did not have this problem.
> > 
> > Are there any Quantarists on the list who have resolved 
> this?
> > 
> > Thanks,
> > Jay
> > W6CJ
> > AAR9QM/T   
> > _______________________________________________
> > Motorola mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/motorola
> > 
> 
> 
> _______________________________________________
> Motorola mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/motorola
> 

-- 

Jim W7RY