[Motorola] Moto accessories - tech info needed

Fri, 26 Apr 2002 21:13:04 -0700

John -

I am not sure about the Syntor.

But, check the stamped number on the chassis under the lid of the
Mitrek just inside where the handle is should be something like:
"HUB1061CPR" or similar.  If it has a "2" like HUB1062CPR then
is is probably the high split, rated for 45-54MHz.  A HUB1061 is a
low-split and will not tune into 6-meters but, will do nicely on 10m.
That's why buying one on e-pay to  put on 6-meters can be a big
gamble is the seller doesn't know what he really has....

Hope this helps.

Paul

----- Original Message ----- 
From: "WB6BLV" <[email protected]>
To: <[email protected]>
Sent: Friday, April 26, 2002 9:04 PM
Subject: [Motorola] Moto accessories - tech info needed

> have the following two Motos for which I need
> accessories (control head/mic/etc) and tech info
> inc schematic if possible
> 
> 1.  SYNTOR HIGH BAND HI POWER 
> 
> 2.  MITREK LOW  (35-45)  MHz HIGH POWER
> 
> is dedicated hardware needed for programming the Syntor?
> can the Mitrek be moved up to 6 meters without enormous expense?
> 
> John
> 
> 
> 
> _______________________________________________
> Motorola mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/motorola
> 