Hi
They are pretty much a “straight off the spec sheet” implementation of the switcher chip.
The parts used are the minimums the manufacturer recommended. Parts types are the
typical “low bidder / Chinese market” stuff. They do indeed work fine (at least the ones
I have used work fine).
They have no input or output filtering. No added protection for this or that. It’s just a *very*
basic switcher at an affordable price. There are hundreds of folks selling pretty much the
same thing.
Plan on putting it in some sort of enclosure (making sure to deal with the heatsink going
to the outside …). Also plan on designing up both an input and an output
filter that have common mode chokes as well as conventional low-pass stuff in them.
That specific listing has some errors in it. The Chinese to English stuff doesn’t always
quite work. It most certainly does *not* put out 900W while puling 15A at 12V… To even
get to the ~ 100W level, you will need a pretty darn good fan blowing on that heatsink.
Bob
folks. looking at using this epay chinesium dc dc converter for portable operation. does anyone have experience with using these as far as quality, receiver noise, etc
DC-DC 12-90V to 12V-130V Boost Converter 900W CV CC Step Up Voltage DC Module Xr
thanks Jeff N2IA
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:
[email protected]This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html