I have made somewhat extensive use of both the RAL and the RAK receivers and would like to share some of my experiences with both.
Both of my receivers were being operated from the original power supplies, which are really too big and too power hungry for ham radio use. They
aren't needed where you don't have big turrets being swung around drawing the line voltage down each time.
In a normal ham station, a very simple supply, providing 180 VDC at a few miliamps is usually all that is required. A regulated 90 VDC is nice,
but not absolutely necessary.
In fact, according to the manuals on these receivers, they work just fine with ONLY the 90 VDC source.
Anyway, with regard to the RAK, I used mine to copy 5 letter code grounps from the U.S. Navy VLF stations while they were still using CW, and
before they switched to RATT. I was intending to work my way up to 30 wpm of steady error-free copy as I wanted to go to sea to be a ship-board radio operator.
I eventually got my 2nd Class Radio Telegraph license toward that end, but many things intervened and I never was able to complete that project.
The Navy station at Jim Creek in Washington state always came in to my station in Missoula, Montana like gang-busters 24/7/365. I think I could
have used a wet-string as an antenna.
The first thing I noticed about my RAK was its amazing stability. It was rock steady. Once tuned to a signal, it remained there. One could literally
hammer on the radio with a hammer and it never moved frequency.
The second, most amazing thing, to find was its "single-signal" selectivity. The "other side" of zero beat simply wasn't there....at all. Not
even a hint of it.
I am still somewhat in the dark as to how this was done. I believe it was due to the "Q" of the tuned circuits in the radio. I understand that
that value was around 1500, which is very unusual for such coils.
Maybe someone here can enlighten me how this was done.
With regard to my RAL, I traded a BC-348 with BC band ARC-5 "Q-5er" for it while I was a new General (actualy Conditional) class ham so that
I could work 15 meters.
I used my RAL for some 12 years as my only station receiver, and never turned it off.
My ONLY complaint with it was the total lack of a real frequency readout. Using the tuning chart in the manual was difficult, but I got used
to it.
Again, like the RAK, it was unconditionally stable.
I really liked its "quietness" and sensitivity.
I used it for every common mode at the time, CW, AM, SSB, RTTY. I could have used it for digital modes (other than CW and RTTY) if they had existed
at the time.
Ken W7EKB
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html