Send Milsurplus mailing list submissions to
        milsurplus@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
        http://mailman.qth.net/mailman/listinfo/milsurplus
or, via email, send a message with subject or body 'help' to
        milsurplus-request@mailman.qth.net

You can reach the person managing the list at
        milsurplus-owner@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Milsurplus digest..."
Today's Topics:

   1. Re: Suggested tuning for ART-13 into a 50 ohm antenna on 75M?
      (B. Smith)
   2. T-195 FSK IN and MO cables (B. Smith)



---------- Forwarded message ----------
From: "B. Smith" <smithab11@comcast.net>
To: milsurplus@mailman.qth.net
Cc: 
Bcc: 
Date: Tue, 14 Mar 2023 19:24:20 -0400
Subject: Re: [Milsurplus] Suggested tuning for ART-13 into a 50 ohm antenna on 75M?
Be very careful when extracting the 813 from its socket, the tube socket
connections are very fragile and break loose from the ceramic.
k4che

On 3/14/2023 6:02 PM, Mack McCormick wrote:
> Ken,
>
> These are all excellent thoughts and I too have arrived at the same
> conclusion that the probable cause is a weak 813. I have others to test.
>
> The PS is stiff with low ripple. I completely rebuilt it for my
> friend. 1100 VDC, 400 VDC, and 27.5 VDC. All very stiff and pure.
>
> Let me swap out a couple of 813's and I'll report the results back here.
>
> Thanks again/
>
> 73,
>
> Mack
> W4AX
> https://www.qrz.com/db/w4ax
>
>
> On Tue, Mar 14, 2023 at 2:13 PM Kenneth G. Gordon
> <kgordon2006@frontier.com> wrote:
>
>     On 14 Mar 2023 at 5:17, Mack McCormick wrote:
>
>     >
>     > Ken,
>     >
>     > Thank you. I  made a typo in my original posting. I am using
>     2000pf not 4000pf.
>     >
>     > Mack
>     > W4AX
>
>     Oh. OK.
>
>     Second question: are you sure your 813 is not weak or worn out? As
>     I read it from various
>     documents I have here on the ART-13, output should be around 100
>     watts.
>
>     You are getting 60 even with SWR at 1:1. That almost perfect SWR
>     means to me that your
>     impedance-matching must be close to perfect.
>
>     And THAT sounds to me like a weak tube.
>
>     At this point, I sincerely doubt that your problem has anything to
>     do with tuning. Yours sounds
>     pretty close to perfect.
>
>     Lastly, how is your screen voltage? Low screen voltage to the
>     final can also cause low power
>     output.
>
>     But you know that.
>
>     I think that if I had the same symptoms you are experiencing, I
>     would, at least temporarily,
>     jack up the screen voltage to see what that does. The 813 can use
>     up to 1100 VDC screen
>     voltage for SOME services. If increasing the screen voltage
>     significantly increases power
>     output, then the tube is weak.
>
>     I am assuming you are using an AC supply with 28 VDC, 1150 VDC and
>     400 VDC outputs.
>     Are you certain your power supply is up to snuff?
>
>     A weak driver tube could also cause your symtoms, but that would
>     show up with low grid
>     current.
>
>     Ken W7EKB
>
>
>
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html





---------- Forwarded message ----------
From: "B. Smith" <smithab11@comcast.net>
To: Milsurplus <milsurplus@mailman.qth.net>
Cc: 
Bcc: 
Date: Wed, 15 Mar 2023 21:42:22 -0400
Subject: [Milsurplus] T-195 FSK IN and MO cables

I've added some info on the T-195 FSK cables
k4che

http://k4che.com/T195%20FSK%20MO/T-195%20FSK%20MO.htm

______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus@mailman.qth.net