[Milsurplus] BC348 IF transformer tuning tool ?

[hwhall@aol.com]

Skinny screwdriver with shrink tubing to prevent accidental shorts??

Wayne
WB4OGM

On Thursday, October 9, 2025 at 02:42:54 PM MDT, jphutch60bj <jphutch60bj at gmail.com> wrote: 

Finished replacing Resistors that were out of spec in my second BC348-R

Finished aligning the set for the most part.

BC348 IF tuning tool ?  I have a Straw type tuning tool I use to adjust 
the bottom of the IF transformers.

--> My issue is, it is to fat to adjust the 2nD IF, secondary coil in 
the vicinity of, under,  the power switch! (pic attached)

The tuning tool I use is "standard" off the shelf tool, its basically a 
tough straw with a metal insert.

Anyone have a tool that can sneak through the switch to tweak the IF 
transformer?

A picture, with a description would help.

I  may have to make one out of a chopstick ?

Thanks

JPHutch

.

______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html