[Milsurplus] Rheostat Repair

[jphutch60bj]

My 2 Cents:

Looks like a nice place for the break to occur, as it looks *not* to be 
on the adjustment track, path, side of the rheostat.

--> Permanent Jewelry Welder - 80a Spot Welder for Jewelry，110v Jewelry 
Welding Machine，Permanent Jewelry Welder kit

Is some thing like this may work from amazon?

On 6/13/2024 9:22 AM, Ray Fantini via Milsurplus wrote:
>
> Don’t know, maybe smarter people can tell me how but think the wire 
> that’s used is something like the stuff they use on heater elements so 
> it can not be soldered, if somehow you were able to get a couple turns 
> un-wound maybe you can just tie them together but looks to me as far 
> as the power pot is concerned, its game over!
>
> How are you doing the entire T-202 mess? The original circuit for 800 
> cycles had that pot (R-201) and all those weird power compensation 
> capacitors switches and all that stuff. I did separate filament 
> transformers for all the tubes except for the weird 2.5 volts for the 
> 843 and a separate huge 10 amp transformer for the ten volts for the 
> 803, used the power stat or whatever you call those huge wire wound 
> pots just on the AC primary of the ten volt 803 supply, the good thing 
> if you got to replace it you don’t have to get an exact match, just 
> something that fits in the same hole.
>
> Ray F/KA3EKH
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home:http://mailman.qth.net/mailman/listinfo/milsurplus
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:Milsurplus at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20240613/9b81618a/attachment-0001.html>