[Milsurplus] Command Set Rcvr cover plate studs

[Jim Whartenby]

I have had success tightening up loose ones on the 51J receiver using vice grips with some washers on either side to prevent marring the aluminum.Regards,Jim
Logic: Method used to arrive at the wrong conclusion, with confidence.  Murphy 

    On Sunday, April 28, 2024 at 04:56:59 PM CDT, hwhall--- via Milsurplus <milsurplus at mailman.qth.net> wrote:  
 
 Has anyone tried to replace or reinstall those little studs that the tube compartment cover plate slide fasterners are supposed to engage? I have some that are missing & one that detached when working out the bent metal case. Of course, I'd like to remedy this. Is there a source for those little pieces, and I wonder if anyone has had success at it before I go off & perhaps try to reinvent a wheel.
WayneWB4OGM______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20240429/d7ad8b1b/attachment.html>