[Milsurplus] AN/GRR-5 Dry battery Cable connector ID Needed

[Steve Haney]

Jim, I have some UW1220FA17 connectors in my online store.  A quick look at
the schematic makes me think that the keyway on the connectors may be set
differently on the different power inputs, but the keyway is adjustable.
Just guessing this is the correct connector, only saw a picture of the
connector on the right hand side of the radio.  Robert may be able to say
if all of the power connectors are the same format but  different keyway
orientation.
Thanks, Steve


On Sat, May 7, 2022 at 4:37 PM Robert Downs via Milsurplus <
milsurplus at mailman.qth.net> wrote:

> Jim,
>
>
>
> CX-1360 is actually the dry battery power cable for the R-174/GRR-5,
> Sounds like you are actually working with the CX-1358 or CX-1359.  However,
> as far as the right-angle 4-pin female cable connector is concerned, the
> only difference is the ID of the cable gland. Which is larger in the one
> that runs off of 6, 12 or 24 VDC to the internal AC/DC vibrator power
> supply.  Anyway, the most common number for the connector is UW1220FAnn or
> UW1320FAnn where “nn” is an odd number between 11 and 17 and is the ID of
> the packing gland in odd 1/32” increments.  Those that I have actually seen
> were 11, 13 and 17.  1220 will be dogbone style and 1320 will be
> cathedral.
>
>
>
> There is also another contractor (Amphenol) who used a longer part number
> beginning with “164-” but I have only seen those in the 9-pin for the R-392.
>
>
>
> In any case, I don’t have any.  Call Bill Perry @ 502-893-8724 and tell
> him what you need it for and he will probably still have some.
>
>
>
> Robert Downs
>
>
>
> *From:* milsurplus-bounces at mailman.qth.net [mailto:
> milsurplus-bounces at mailman.qth.net] *On Behalf Of *Jim Madden
> *Sent:* Saturday, May 7, 2022 14:42
> *To:* milsurplus at mailman.qth.net
> *Subject:* [Milsurplus] AN/GRR-5 Dry battery Cable connector ID Needed
>
>
>
>
>
> Hi Gentlemen….. I recently Built a “Kit” Battery Eliminator power supply
> “K101A”and am at the cable building Phase… I need to know what the
> connector is that is on the CX-1360/U cable that connects to the radio or
> it’s Equivilent?Thanks in advance.Jim KB1PFL
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 



Steve Haney

Haney Electronic Co

8012 County Road 1009

Godley, TX  76044-3688

817-480-2282  WWW.Haneyelectronic.com <http://WWW.Haneyelectroic.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20220507/35a834dc/attachment-0001.html>