[Milsurplus] [ARC5] 28 volt transformer question ?

[Mark K3MSB]

 I disagree.    If for a receiver,  the current draw is constant and a
suitable dropping resistor can be used.    I've done this frequently with
ARC-5 receivers.

Or, just put a variac in front of it and drop the input voltage.

Mark K3MSB

On Mon, Sep 7, 2020 at 10:42 AM J Mcvey via ARC5 <arc5 at mailman.qth.net>
wrote:

> Using that xfmr with full wave rectification and filter cap would yield
> about 39 volts out.
> So, it's a good candidate for the scrap yard.
>
>
>
> On Sunday, September 6, 2020, 11:10:08 PM EDT, Hubert Miller <
> kargo_cult at msn.com> wrote:
>
>
> I had this AM-FM broadcast receiver, with step tuning, and the logic
> developed a problem.
>
> As you know, these are impractical to repair, with this kind of problem,
> uneconomical.
>
> Well, in my city, there is very limited collection of ewaste, and an
> irrational I think, regulation
>
> of categories. So instead of tossing the whole thing in the garbage, I
> disassembled it, tossed
>
> the cabinet and chassis in the recycle, and the circuit boards in the
> regular garbage.
> I found that the power transformer is 28-0-28 volts and looks good for a
> steady 5+ amp. What
>
> I'm wondering, should I keep this for a dynamotor spinnner, for dynos like
> the command sets
>
> or RU-GF class? With a filter cap, the output should stay "near" 28 volts
> under load. You just
>
> don't want to have such PS charged up to peak and then connect it to the
> load, which might
>
> be hard on tubes. Or what if I just used it without filter cap, to spin a
> dynamotor? Or instead,
>
> go ahead with a multiple thousands mFd filter cap and maybe a small series
> resistance to
>
> adjust voltage under load?
> Many years ago I used such a brute force supply I bought from Fair Radio
> to power an ARR-15
>
> receiver. At that time, I didn't even think to worry about the exact
> output voltage.
>
> So what about this transformer? 24 volts would be preferable but the price
> on this one was
>
> right.
>
> -Hue Miller
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20200907/c92ef46d/attachment-0001.html>