[Milsurplus] SCR-AR-183 Parts Needed

[Mark K3MSB]

Hello All

Next year I plan on restoring my SCR-AR-183 system.

I need the junction box.   The correct one is the TM-AH-172.   If anyone
has one that they'd like to part with, please let me know.     More
realistically,  I'm going to have to build a junction box.   I have no
clear pictures of the TM-AH-172.   The only pictures I've found on the web
are darkened scans of manual photos and provide little details.   Might
anyone have a clear picture?

If I go the home-brew route I would not use the correct jacks (cost
concerns), but I'd like to be close to the correct dimensions and jack
layout.   I've also read that junction boxes came with the airframe, and
that many times they were built after the fact,  so perhaps a home brew one
is not too far from reality. Comments?

I have an unused RU-3 Junction Box I'd be willing to use as (part of a
trade) for a TM-AH-172.   It has the yellow M in a yellow circle.

Also,  I'm looking for a BC-AR-198 relay.   I have a BC-AR-408 relay which
is 28V (and the SC-AR-183 is a 14V system).    I was planning on replacing
the relay in the 408,  but would prefer to swap for a BC-AR-198 (or just
purchase).

Finally,  my BC-AR-229 receiver has had the original front panel connector
replaced with a Cinch Jones connector.   I'm looking for the original
connector.

73 Mark K3MSB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20201114/d275037a/attachment.html>