[Milsurplus] BC-348-Q restoration

[jphutch60bj]

If I remember correctly the HKLR versions do not have the spring arm 
thing-ie to worry about.  The switch shaft also is self aligning.

Hutch


On 6/15/2020 11:42 PM, Robert Downs via Milsurplus wrote:
>
> The JNQ manuals cover removal and installation of the Antenna / RF / 
> Detector / Oscillator boxes  in Paragraph 33.  As far as I recall, 
> except for the early prelims, the manuals on the HKLR and EMOPS 
> include this information as well. Although probably not in Paragraph 33.
>
> Robert Downs
>
> *From:*milsurplus-bounces at mailman.qth.net 
> [mailto:milsurplus-bounces at mailman.qth.net] *On Behalf Of *Mark K3MSB
> *Sent:* Monday, June 15, 2020 21:30
> *Cc:* Milsurplus
> *Subject:* Re: [Milsurplus] BC-348-Q restoration
>
> Well,  my web site had the detailed pictures of the 4 modules but 
> nothing about their removal.   So,  after working 8 hours and spending 
> 3 hours on yard work,  I did some fast scrambling and updated my web 
> site with some removal notes.   First pass,  but if I didn't get this 
> up tonight it would probably fall off the radar....   I will try to 
> align my terms with those in the manual at a later time.    Comments 
> welcome.
>
> http://www.k3msb.com/bc348/main.html
>
> Scroll down and select the link for "Antenna / RF / Detector / 
> Oscillator (sub)Assembly Photos"
>
> 73 Mark K3MSB
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20200616/527e8511/attachment.html>