[Milsurplus] Unknown Transceiver

[Mike Feher]

Just keep in mind that the antenna is also the resonant output tank circuit,
and the input L for the receiver. 73 - Mike 

 

Mike B. Feher, N4FS

89 Arnold Blvd.

Howell NJ 07731

848-245-9115

 

-----Original Message-----
From: milsurplus-bounces at mailman.qth.net
<milsurplus-bounces at mailman.qth.net> On Behalf Of Hubert Miller
Sent: Monday, December 14, 2020 5:42 PM
To: milsurplus at mailman.qth.net
Subject: Re: [Milsurplus] Unknown Transceiver

 

Great photo, Al, big thanks!

I was wondering how I would have designed the loop. 

If you placed the two slots on the back of the radio, slot horizontal
instead of vertically directed, and one above the other, instead of side by
side,  you could dispense with the special bend in the antenna sections, but
the antenna form would then be somewhat unsymmetric. But it wouldn't be so
unsymmetric as to weaken it structurally. -Hue Miller
______________________________________________________________

Milsurplus mailing list

Home:  <http://mailman.qth.net/mailman/listinfo/milsurplus>
http://mailman.qth.net/mailman/listinfo/milsurplus

Help:  <http://mailman.qth.net/mmfaq.htm> http://mailman.qth.net/mmfaq.htm

Post:  <mailto:Milsurplus at mailman.qth.net> mailto:Milsurplus at mailman.qth.net

 

This list hosted by:  <http://www.qsl.net> http://www.qsl.net

Please help support this email list:  <http://www.qsl.net/donate.html>
http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20201214/486c218f/attachment-0001.html>